Skip to main content
Sewing · Free planning tool

Seam Allowance & Cut Size Calculator

Estimate cut pattern dimensions from finished target dimensions for flat panels, garment edges, and circular pieces with synchronized metric and imperial conversion.

Start with the example, then enter your measurements. Results update as you type.

Your measurements

Unit System

Select shape geometry.

Target finished size without seam allowances.

Standard seam allowance to add per seam edge.

Edges along this dimension only. Ignored for circle diameter, which always adds twice the allowance.

View result ↓
Total Cut Dimension
Calculating...

Your project details

Total Allowance Added:—
Target Finished Size:—
What this means

Awaiting valid inputs...

⚡ Calculated in your browser · Instant local output
Keep your calculation.

Download a worksheet with your inputs, result and method.

On this page
The method

How the calculation works

Flat Geometry: Cut Dimension = Finished Dimension + (Seam_Edges × Seam_Allowance) ; Circular Geometry: Cut Diameter = Finished Diameter + (2 × Seam_Allowance)

Adds seam allowances to target finished dimension based on number of active seamed edges or calculates circle diameter expansion. Seam allowance values represent canonical standard dimensions (e.g. 1/4″ = 0.25″ = 0.64 cm), correctly scaled to inches or centimeters.

Finished Dimension
Desired finished measurement after sewing and pressing
Seam_Edges
Count of seamed edges along this dimension: 1 on fold or 2 opposite edges. Calculate width and length separately.
Seam_Allowance
Width of seam allowance (e.g. 1/4″ = 0.250″ = 0.635 cm, 5/8″ = 0.625″ = 1.588 cm)

Rounding: Imperial cut sizes displayed to 3 decimal places (0.001″); metric displayed to 2 decimal places (0.01 cm).

Follow the numbers

Worked example

Example (Imperial): 12″ finished panel with 1/4″ (0.250″) seam allowance on 2 edges: Cut Size = 12″ + (2 × 0.250″) = 12.500″ (31.75 cm).
Example (Metric): 30.48 cm finished panel with 0.25″ (0.64 cm) seam allowance on 2 edges: Cut Size = 30.48 cm + (2 × 0.635 cm) = 31.75 cm (12.500″).
Circular Example: 8″ (20.32 cm) finished round with 1/2″ (0.500″ / 1.27 cm) allowance: Cut Diameter = 8″ + (2 × 0.500″) = 9.000″ (22.86 cm).

Before you cut or cast on

Things to know

Calculate width and length separately; each dimension has one or two seamed edges. Circle mode uses finished diameter, not circumference or tube width. Pattern pieces that already include seam allowance must not receive it twice. Follow your pattern for hems, folds and construction details.

These are planning estimates under the stated model. Check your measurements and pattern, and test a sample before committing materials.