Crochet Gauge & Starting Chain Calculator
Estimate starting chain counts and foundation stitches from swatch gauge, target width, stitch repeat multiples, and turning chain offsets.
Start with the example, then enter your measurements. Results update as you type.
Your measurements
Stitches counted in 4 inches (10.16 cm) of blocked crochet.
Desired finished width of project.
Standard turning chain allowance per stitch height.
Stitch repeat increment (e.g. 2 for moss stitch, 3 for granny clusters).
Your project details
Awaiting valid inputs...
Download a worksheet with your inputs, result and method.
How the calculation works
Foundation Stitches = round( Target_Width × (Swatch_Gauge / 4) ) ; Total Starting Chains = Foundation Stitches + Turning_OffsetMultiplies target width by stitches-per-inch rate, fits to nearest pattern repeat multiple to establish working foundation stitches, and adds the required turning chain offset for the specified stitch height.
- Target_Width
- Desired finished width in inches (or converted from cm)
- Swatch_Gauge / 4
- Crochet stitch rate per linear inch
- Foundation Stitches
- Working base stitches established on row 1
- Turning_Offset
- Stitch height allowance (+1 sc, +2 hdc, +3 dc, +4 tr)
- Total Starting Chains
- Complete initial chain count to work into
Rounding: Foundation stitches round to nearest whole integer or repeat multiple; turning chains are added without fractional rounding.
Worked example
Example: 30″ wide blanket at 16 sts/4″ (4.0 sts/in) in Double Crochet (dc, +3 ch turning offset) with multiple of 1: Foundation base = 30 × 4.0 = 120 stitches. Total starting chain = 120 + 3 = 123 starting chains. Work first dc into 4th chain from hook.
Things to know
US stitch terminology. This model excludes the turning chain from the working-stitch count (adds 1 sc, 2 hdc, 3 dc or 4 tr). Some patterns count that chain as a stitch; follow their starting-chain instructions instead. Gauge is stitches per 4 inches (10.16 cm), not per 10 cm. Repeat multiples omit any extra edge stitches; calculate those separately.
These are planning estimates under the stated model. Check your measurements and pattern, and test a sample before committing materials.