Skip to main content
Knitting · Free planning tool

Knitting Gauge & Cast-On Calculator

Estimate adjusted cast-on stitch counts and target dimensions when your blocked swatch gauge differs from the pattern specification.

Start with the example, then enter your measurements. Results update as you type.

Your measurements

Number of stitches per 4 inches (10.16 cm) specified in pattern.

Starting stitch count stated in pattern instructions.

Stitches counted in your washed and blocked test swatch over 4 inches.

If stitch pattern requires a repeat (e.g. multiple of 4, 6, 8).

View result ↓
Adjusted Cast-On Count
Calculating...

Your project details

Pattern Target Width:—
Achieved Width at Your Swatch:—
Repeat Multiple Adjustment:—
What this means

Awaiting valid inputs...

⚡ Calculated in your browser · Instant local output
Keep your calculation.

Download a worksheet with your inputs, result and method.

On this page
The method

How the calculation works

Target Width = Pattern_Cast_On / (Pattern_Gauge / 4) ; Exact New Cast-On = Target Width × (Swatch_Gauge / 4) ; Adjusted Cast-On = round( Exact New Cast-On [fitted to Repeat_Multiple] )

Determines pattern target width from pattern cast-on and pattern gauge, then calculates required stitches to achieve that exact width at your personal swatch gauge.

Pattern_Gauge / 4
Stitch density per inch specified in pattern
Target Width
Finished width in inches intended by the pattern designer
Swatch_Gauge / 4
Your actual stitch density per inch
Adjusted Cast-On
New starting stitches fitted to nearest valid pattern multiple

Rounding: Cast-on count rounds to the nearest positive whole stitch or nearest positive repeat multiple; ties round upward. At least one stitch is returned. Rounding may change achieved width, so check the width shown in your result.

Follow the numbers

Worked example

Example: Pattern calls for 100 sts at 20 sts/4″ (5.0 sts/in) → Target width is 100 / 5.0 = 20.0″. Your blocked swatch is 18 sts/4″ (4.5 sts/in). Adjusted Cast-On = round(20.0 × 4.5) = 90 stitches. If working a 6-stitch repeat: 90 is an exact multiple of 6 (15 repeats).

Before you cut or cast on

Things to know

Requires a washed and fully dried gauge swatch measured across central stitches, avoiding curling selvedge edges.

These are planning estimates under the stated model. Check your measurements and pattern, and test a sample before committing materials.