Quilt Binding Strip Calculator
Estimate binding fabric yardage and strip cuts for straight-grain WOF or continuous bias binding with 20" miter and joining reserve.
Start with the example, then enter your measurements. Results update as you type.
Your measurements
Width of trimmed quilt top.
Length of trimmed quilt top.
Cut width of binding strips before folding.
Straight grain for straight quilts; bias for scalloped edges.
Your project details
Awaiting valid inputs...
Download a worksheet with your inputs, result and method.
How the calculation works
Perimeter = (2 × Quilt_W) + (2 × Quilt_L) ; Total Binding Length = Perimeter + 20″ ; Straight WOF: Strips = ceil( (Total Binding Length - Strip_Width) / (40.0″ - Strip_Width) ) ; Yards = ceil( ((Strips × Strip_Width) / 36) × 8 ) / 8 ; Continuous Bias: Square Side = ceil( sqrt(Total Binding Length × Strip_Width) ) + 2″ ; Yards = ceil( (Square Side / 36) × 8 ) / 8Calculates perimeter (2W + 2L) plus 20″ safety reserve for 4 mitered corners and joining tails, then calculates WOF strips or square continuous bias dimensions.
- Perimeter + 20″
- Quilt perimeter plus 20″ reserve for 4 mitered corners and joining tail overlap
- 40.0″ Usable WOF
- Cross-grain width of fabric after removing manufactured selvages
- Strip_Width
- Cut width of binding strips (default 2.50″ for standard double-fold French binding)
Rounding: Binding yardage rounds upward to the nearest 1/8 yard (0.125 yd). The corresponding meter purchase estimate rounds upward to 0.01 m.
Worked example
Example: 50″ × 65″ quilt top with 2.5″ straight-grain binding: Perimeter = (2×50) + (2×65) = 230″ + 20″ reserve = 250″. WOF strips needed = ceil((250 - 2.5) / (40 - 2.5)) = 7 strips. Total cut length = 7 × 2.5″ = 17.5″. Yardage = 17.5 / 36 = 0.486 yd → rounded up to 1/2 yd (0.500 yds / ~0.46 m). Cut 7 strips at 2.5″ WOF.
Things to know
Assumes 40 inches usable width. Straight-strip count deducts one strip width per diagonal join. Bias square includes a 2-inch size reserve and is rejected if wider than 40 inches; verify your continuous-tube method and cut a sample before using valuable fabric.
These are planning estimates under the stated model. Check your measurements and pattern, and test a sample before committing materials.