Skip to main content
Fabric · Free planning tool

Fabric GSM to Ounces Weight Converter

Convert fabric areal weight between GSM (grams per square meter) and oz/yd² with linear yard weight calculations across bolt widths.

Start with the example, then enter your measurements. Results update as you type.

Your measurements

Direction of areal weight conversion.

Enter numeric weight from fabric tag or specification.

Fabric bolt width for calculating linear yard/meter weight.

View result ↓
Converted Fabric Weight
Calculating...

Your project details

Fabric Classification:—
Linear Bolt Weight:—
What this means

Awaiting valid inputs...

⚡ Calculated in your browser · Instant local output
Keep your calculation.

Download a worksheet with your inputs, result and method.

On this page
The method

How the calculation works

oz/yd² = GSM / 33.905747 ; GSM = oz/yd² × 33.905747 ; Linear oz/yd = oz/yd² × (Bolt_Width / 36) ; Linear g/m = GSM × (Bolt_Width × 0.0254)

Converts mass per area using 1 avoirdupois ounce = 28.349523125 grams and 1 yard = 0.9144 meters, then calculates linear bolt mass. This is arithmetic conversion, not a laboratory fabric test.

33.905747
Conversion factor derived from 28.349523125 grams per ounce divided by 0.9144 squared square meters per square yard
Bolt_Width
Full cross-bolt width in inches
Linear Mass
Weight of one running linear yard or linear meter of bolt

Rounding: oz/yd² rounded to 2 decimal places; GSM rounded to 1 decimal place; linear weights rounded to 2 decimal places (oz) and 1 decimal place (g).

Follow the numbers

Worked example

Example: 150 GSM quilting cotton on 54″ bolt: Areal weight = 150 / 33.905747 = 4.42 oz/yd². Linear yard weight = 4.42 × (54 / 36) = 6.64 oz per linear yard. Linear meter weight = 150 × (54 × 0.0254) = 205.7 g per linear meter. Classification: Medium Weight.

Before you cut or cast on

Things to know

Converts the mass-per-area value supplied by you; it does not measure or certify fabric. Weight bands are descriptive and cannot determine drape, fiber or suitability on their own.

These are planning estimates under the stated model. Check your measurements and pattern, and test a sample before committing materials.