In this guide
Wider fabric saves yardage only when pieces fit into a shorter valid layout.
| Inches | Exact centimeters | Check |
|---|---|---|
| 44 | 111.76 | Measured usable width after selvages |
| 45 | 114.3 | Whether listing includes selvages |
| 54 | 137.16 | Grainline, nap and repeat |
| 60 | 152.4 | Width after prewashing |
| 108 | 274.32 | Usable wideback width |
Width is across the bolt; yardage is along it
One yard is 36 inches; one inch is exactly 2.54 centimeters. The examples in the table are listing widths you may encounter, not a promise that every fabric is sold in those widths. A folded 60-inch fabric is approximately 30 inches from fold to selvage before exclusions. A tubular knit has a closed circumference: confirm whether the listing describes its laid-flat width or its opened width before comparing it to a flat cutting layout.
Measure before planning
The listed width may include selvages. Measure the usable fabric body without stretching. If prewashing, test and remeasure before relying on a tight layout. The calculator’s fixed selvage allowance is an explicit assumption, not the measured width of every bolt.
Test placement
Mark direction
Identify required grainline, fold, nap and print direction. Keep each piece oriented accordingly.
Place complete pieces
Use full-size paper pieces or a scaled drawing including seams and hems. Work within the narrowest usable width.
Measure length
Allow for matching, defects, squaring and cutting. Pieces that cannot share a row may require another complete row.
Round the purchase
Use the seller’s cutting increment and a measured shrinkage allowance where relevant. A pure area ratio cannot account for all offcuts.
Work the rows, then buy the length
Suppose two complete pieces are each 20 inches wide × 30 inches long, with all seam allowances already included. On 43 usable inches, both fit across one row: 20 + 20 = 40, leaving 3 inches. Required length is 30 inches. On 38 usable inches, two cannot share a row, so two rows require 60 inches. This assumes grain-parallel placement and disallows rotation. The 30-inch length is ⅚ yard; the 60-inch length is 1⅔ yards. Round upward to the seller’s increment, then add a reasoned preparation or matching reserve. A directional print or large repeat can consume more than these rectangles suggest.
Use the rectangular cutting calculator and grainline guide together.
Measure before the first cut.
Estimate yardage from your required dimensions, fabric width and chosen shrinkage allowance.
Explore the planning toolSources & editorial notes
- BERNINA — Woven grainline — https://www.bernina.com/bernina/media/BNZ/Projects/Grainline.pdf
- AQS — Quiltmaking Essentials — https://www.americanquilter.com/wp-content/uploads/aqsquilt-images/2018/01/AQS-Quiltmaking-Essentials.pdf
- Sewing & Craft Alliance — Sewing with knits — https://www.sewing.org/files/guidelines/4_215_sewing_with_knits.pdf
- Sources checked 13 November 2026. Original arithmetic and schematic teaching diagrams; hypothetical samples are identified. No independent hands-on craft testing, product performance testing or named expert review is claimed.

