Skip to main content
Fabric · Reference

Fabric Widths and Yardage: Plan the Cutting Layout

Wider fabric saves yardage only when pieces fit into a shorter valid layout.

In this guide

    Wider fabric saves yardage only when pieces fit into a shorter valid layout.

    Nominal fabric widths
    Inches Exact centimeters Check
    44 111.76 Measured usable width after selvages
    45 114.3 Whether listing includes selvages
    54 137.16 Grainline, nap and repeat
    60 152.4 Width after prewashing
    108 274.32 Usable wideback width

    Width is across the bolt; yardage is along it

    One yard is 36 inches; one inch is exactly 2.54 centimeters. The examples in the table are listing widths you may encounter, not a promise that every fabric is sold in those widths. A folded 60-inch fabric is approximately 30 inches from fold to selvage before exclusions. A tubular knit has a closed circumference: confirm whether the listing describes its laid-flat width or its opened width before comparing it to a flat cutting layout.

    Measure before planning

    The listed width may include selvages. Measure the usable fabric body without stretching. If prewashing, test and remeasure before relying on a tight layout. The calculator’s fixed selvage allowance is an explicit assumption, not the measured width of every bolt.

    Test placement

    Mark direction

    Identify required grainline, fold, nap and print direction. Keep each piece oriented accordingly.

    Place complete pieces

    Use full-size paper pieces or a scaled drawing including seams and hems. Work within the narrowest usable width.

    Measure length

    Allow for matching, defects, squaring and cutting. Pieces that cannot share a row may require another complete row.

    Round the purchase

    Use the seller’s cutting increment and a measured shrinkage allowance where relevant. A pure area ratio cannot account for all offcuts.

    Two 20 by 30 inch rectangles fit side by side across 43 usable inches. Across 38 inches only one fits per row, requiring two rows.
    Original rectangle example with rotation disallowed and no matching or shrinkage reserve. Both full rows are shown on the right: total length is 60 inches. Width and length are different measurements.

    Work the rows, then buy the length

    Suppose two complete pieces are each 20 inches wide × 30 inches long, with all seam allowances already included. On 43 usable inches, both fit across one row: 20 + 20 = 40, leaving 3 inches. Required length is 30 inches. On 38 usable inches, two cannot share a row, so two rows require 60 inches. This assumes grain-parallel placement and disallows rotation. The 30-inch length is ⅚ yard; the 60-inch length is 1⅔ yards. Round upward to the seller’s increment, then add a reasoned preparation or matching reserve. A directional print or large repeat can consume more than these rectangles suggest.

    Use the rectangular cutting calculator and grainline guide together.

    Keep your project moving

    Measure before the first cut.

    Estimate yardage from your required dimensions, fabric width and chosen shrinkage allowance.

    Explore the planning tool

    Sources & editorial notes