Skip to main content
Crochet · Free planning tool

Crochet Gauge & Starting Chain Calculator

Estimate starting chain counts and foundation stitches from swatch gauge, target width, stitch repeat multiples, and turning chain offsets.

Start with the example, then enter your measurements. Results update as you type.

Your measurements

Unit System

Stitches counted in 4 inches (10.16 cm) of blocked crochet.

Desired finished width of project.

Standard turning chain allowance per stitch height.

Stitch repeat increment (e.g. 2 for moss stitch, 3 for granny clusters).

View result ↓
Total Starting Chains
Calculating...

Your project details

Foundation Base Stitches:—
Stitch Density Rate:—
Turning Chain Added:—
What this means

Awaiting valid inputs...

⚡ Calculated in your browser · Instant local output
Keep your calculation.

Download a worksheet with your inputs, result and method.

On this page
The method

How the calculation works

Foundation Stitches = round( Target_Width × (Swatch_Gauge / 4) ) ; Total Starting Chains = Foundation Stitches + Turning_Offset

Multiplies target width by stitches-per-inch rate, fits to nearest pattern repeat multiple to establish working foundation stitches, and adds the required turning chain offset for the specified stitch height.

Target_Width
Desired finished width in inches (or converted from cm)
Swatch_Gauge / 4
Crochet stitch rate per linear inch
Foundation Stitches
Working base stitches established on row 1
Turning_Offset
Stitch height allowance (+1 sc, +2 hdc, +3 dc, +4 tr)
Total Starting Chains
Complete initial chain count to work into

Rounding: Foundation stitches round to nearest whole integer or repeat multiple; turning chains are added without fractional rounding.

Follow the numbers

Worked example

Example: 30″ wide blanket at 16 sts/4″ (4.0 sts/in) in Double Crochet (dc, +3 ch turning offset) with multiple of 1: Foundation base = 30 × 4.0 = 120 stitches. Total starting chain = 120 + 3 = 123 starting chains. Work first dc into 4th chain from hook.

Before you cut or cast on

Things to know

US stitch terminology. This model excludes the turning chain from the working-stitch count (adds 1 sc, 2 hdc, 3 dc or 4 tr). Some patterns count that chain as a stitch; follow their starting-chain instructions instead. Gauge is stitches per 4 inches (10.16 cm), not per 10 cm. Repeat multiples omit any extra edge stitches; calculate those separately.

These are planning estimates under the stated model. Check your measurements and pattern, and test a sample before committing materials.